1/LPP523450 S

VARTA’s CellPac LITE series offers a range of pre-configured battery packs that are immediately available for a wide range of applications. This model uses a single lithium polymer cell and has a capacity of 1000mAh. Available directly from VARTA Storage distribution partners this battery pack is slim, light and suitable for all.

Technical drawing of VARTA LiPo battery 523450, 3.7V 1000mAh, dimensions 52×34.5mm max, with three 50±5mm wires

1/LPP523450 S

VARTA’s CellPac LITE series offers a range of pre-configured battery packs that are immediately available for a wide range of applications. This model uses a single lithium polymer cell and has a capacity of 1000mAh. Available directly from VARTA Storage distribution partners this battery pack is slim, light and suitable for all.

Technical drawing of VARTA LiPo battery 523450, 3.7V 1000mAh, dimensions 52×34.5mm max, with three 50±5mm wires
Downloads Downloads
Product Range Product Range
Contact Contact
Circuit diagram of LPP 523450 S battery with PTC, PCM PLFE NTC module and outputs P+, NTC, P-, CL+, CL-

IMPORTANT FACTS

  • Certified according to IEC62133 ed.2 and IEC62133-2
  • RoHS and REACH compliant battery
  • NTC for temperature control
  • Slim, flat and light battery solution
  • Available from authorised VARTA Storage distributors
Circuit diagram of LPP 523450 S battery with PTC, PCM PLFE NTC module and outputs P+, NTC, P-, CL+, CL-

IMPORTANT FACTS

  • Certified according to IEC62133 ed.2 and IEC62133-2
  • RoHS and REACH compliant battery
  • NTC for temperature control
  • Slim, flat and light battery solution
  • Available from authorised VARTA Storage distributors
TECHNICAL INFORMATION  

Nominal capacity

1000 mAh typical

Certification

IEC62133 ed.2 und IEC62133-2

Discharge current

2000 mA

Exp. cycle life at (0.3 C / 0.5 C), 22 °C ± 2 °C

500 cycles > 70% initial cap

Charging temperature

0 to 45°C

Discharge temperature

-10 to 60°C

Watt-Hour Rating

3,7 Wh